Below you will find a range of training, instructional and support information for using the RIW System. You can browse the various categories, or type keywords into the search box. If you are new to RIW, please view the Getting Started category.
Knowledge Centre Search
How does a company add and configure kiosk safety briefings?
Safety briefings are information that supports safe working of a site. Briefings are delivered to cardholders as they swipe in at a site RIW System enabled Kiosk or Tablet Solution. Safety briefings can be added and configured to be delivered to cardholders over a period of time.
This instruction applies to the following RIW System User Roles:
- Advanced Project Admin
- Employer Admin
- Employer Admin - No Payment
- Project Admin
- Site Admin
Step 1: Log in to the RIW System
Go to https://app.riw.net.au and login using your credentials.
Step 2: Administration tab
Click on the Administration tab which appears on the top of the screen.
Step 3: Briefing shortcut
Click on the Briefing shortcut.
Step 4: Create a new briefing
Click on the Add button to create a new briefing
Step 5: Briefing details
Complete the new briefing details:
- Name: Name the new briefing
- Category: Safety Briefing is the only category
- Specific To: Select whether the briefing is specific to the network, a project or to a site.
- Content: Upload a PDF file with the briefing material by clicking on the Browse button and locating the file on your PC/device.
Note: As the kiosks have a landscape screen orientation it is recommended that all content be produced in landscape orientation to better align with this and improve readability.
When all the fields are completed, click on Save.
Step 6: Configure the briefing
Click on the Administration tab which appears on the top of the screen.
Step 7: Site tab
Click on the Site shortcut.
Step 8: Site listing
A list of sites will appear. Highlight the site that the briefing is for and click on Edit.
Step 9: Briefing tab
Click on the Briefing tab, then click the Add button.
Step 10: Add briefing
Complete the Add Briefing box:
- Briefing: Start typing the name of the briefing and the a drop down will appear for selection. If you can’t remember the exact name of the required briefing, to display a list of all briefings applicable to the site you are defining, click in the Briefing text box and add a space.
- Is Active: The Is Active check box must be ticked for the Safety Briefing requirement to be enforced from the Start Date
- Start Date: Is the date the briefing will appear on the kiosk for cardholders
- End Date: Is the date the briefing will cease to appear for cardholders
Click on the Save button.
IMPORTANT NOTE: When a safety briefing is first added to the RIW System following this process, there may a short delay of up to 30 minutes while the safety briefing is synced to the Kiosk. During this syncing period, cardholders will be unable to view the briefing and will be provided a Kiosk onscreen message requesting them to try again in 10 minutes or to contact an Access Controller for site access.
The site safety briefing has now been added.
RIW Knowledge Centre Article Link:
https://support.riw.net.au/support/solutions/articles/51000152272
Did you find it helpful? Yes No
Send feedback