This guide has been developed to provide the sequence on how to start up a kiosk from the powered down position. 

A video demonstration can be found here.

---

This instruction applies to the following RIW System User Roles: {strike out those that do not apply}

• Helpdesk
• Network Manager
• Network Manager - Read Only
• Employer Administrator (Premium Functionality Employer)
• Employer Administrator (Premium Functionality Employer) - No Payment
• Employer Administrator (Premium Functionality Employer) - Read Only
• Employer Administrator
• Employer Administrator - No Payment
• Employer Administrator - Read Only
• Advanced Project Administrator
• Project Administrator
• Site Administrator

Step 1: Unlock the tablet case

Locate the key and unlock the case.  The lock is on the left side of the casing.

Step 2: Power button

Lever the tablet at the top left corner and locate the power button on the top edge of the tablet with your finger.  Press the power button for 5 seconds.

Step 3: Power Source

If the Flat Battery icon is displayed, check that the tablet is connected to the charger and the charger is plugged into an operational power point.

Step 4: Load Microsoft Windows operating system

The Microsoft Windows operating system will begin loading once the tablet has power.  The tablet screen will have the following text displayed; Preparing Kiosk in the background - Please wait.

The loading of the operating system may take up to 20 minutes and is dependent on the speed and quality of the internet connection.

Step 5: Completion of process

Once the operating system loading process is completed, the main tablet screen will display.  The tablet is ready for use.

RIW Knowledge Centre Article Link:

https://support.riw.net.au/support/solutions/articles/51000225659

---