Below you will find a range of training, instructional and support information for using the RIW System. You can browse the various categories, or type keywords into the search box. If you are new to RIW, please view the Getting Started category.
Knowledge Centre Search
Can a cardholder use their virtual card when undertaking a test on a Breathalyser?
Currently virtual RIW cards will not register results to the cardholders profile on the RIW system. However, if a virtual card is scanned on the Breathalyser unit, it will enable the cardholder to conduct a breathalyser test which can be verified by the Access Controller at the time of testing. However, the result will not be recorded against the cardholders profile in the RIW system.
RIW Knowledge Centre Article Link:
https://support.riw.net.au/support/solutions/articles/51000030143
Did you find it helpful? Yes No
Send feedbackWill a Breathalyser device work in offline mode?
A Breathalyser device will work in offline mode, however results won’t be pushed into the RIW System until communication is re-established. Therefore in the event of a non-negative result – no notifications would be sent out during the period of the network outage.
RIW Knowledge Centre Article Link:
https://support.riw.net.au/support/solutions/articles/51000030151
Did you find it helpful? Yes No
Send feedbackHow does a cardholder use a standalone Breathalyser unit?
This article details how a cardholder can use a standalone Breathalyser unit that is integrated with the RIW System.
This instruction applies to the following user roles:
- Access Controller
- Rail Industry Worker (myRIW)
1 | When you attend a site with a standalone Breathalyser unit, scan your RIW card on the QR code reader on the Breathalyser device. NOTE: Only physical RIW cards can be used. Virtual RIW cards are not accepted. |
2 | When prompted, blow into the Breathalyser device. The device will take about 20 seconds to upload the result into the RIW System. |
3 | Sign in to site with an Access Controller, who will confirm you meet site requirements. If a non-negative result is recorded, an automatic site block will be placed. |
Article link:
https://support.riw.net.au/support/solutions/articles/51000030150
Did you find it helpful? Yes No
Send feedbackHow does a company set breathalyser requirements for a Kiosk in the RIW System?
This article details how to set breathalyser requirements when integrated with a kiosk in the RIW System.
Before updating kiosk or breathalyser settings, the device must be added to the RIW System. Refer to How does a company add a new hardware device for a site in the RIW System?
This instruction applies to the following user roles:
- Advanced Project Admin
- Employer Admin (where designated as a Contractor In Charge of a project)
- Employer Admin - No Payment (where designated as a Contractor In Charge of a project)
- Helpdesk
- Project Admin
- Site Admin
1 | Go to https://app.riw.net.au and log in using your credentials. |
2 | Click on Administration > Site. Select the site where the Kiosk and breathalyser is installed and click Edit. |
3 | Select Kiosks from the left-hand menu.
Site status can be set to Open, Closed or Evacuation mode. Please refer to How to place a kiosk into evacuation mode for further guidance on this feature. The following criteria can be set when a breathalyser unit is integrated with a Kiosk device for:
The follow settings can be determined for each of the above cohorts.
|
Important!
When a cardholder is denied access to site due to a non-negative breathalyser result, an SMS and email will be sent to the designated site contacts at the site where the result was recorded. The cardholder will be automatically blocked from site.
Site blocks can only be lifted by a user with the relevant permission after following secondary confirmatory testing.
Undertaking a secondary breathalyser test will not automatically lift a site block.
Breathalyser test records are available on a cardholder's profile, however the result will be recorded on the Swipes tab in the RIW System as Kiosk Access Denied - BrAC Test Non-Negative. For more information refer to What are the different type of swipe events in the RIW System?
Article link:
https://support.riw.net.au/support/solutions/articles/51000074687
Did you find it helpful? Yes No
Send feedback
