Below you will find a range of training, instructional and support information for using the RIW System. You can browse the various categories, or type keywords into the search box. If you are new to RIW, please view the Getting Started category.
Knowledge Centre Search
How to submit a hardware maintenance or technical support request
Where an RIW System enabled Kiosk or Tablet solution requires maintenance due to a system fault or other operational issue, and is not available for use for sign in/sign out, please follow the instructions detailed below.
Step 1: Raise a service request or contact RIW Service Desk (urgent/out of hours)
To raise RIW Hardware Technical Support Request, go to https://www.riw.net.au/contact-us/request-a-service/ and select category & sub-category mentioned in the below screenshot:

If the matter is more urgent and/or out of hours, you can contact the RIW Service Desk direct on 1300 101 682. An urgent request would be considered a Priority 1 or 2 issue, as detailed in the Priority Definitions of Support at the end of this article.
Step 2: Fill in the service request
The following information needs to be completed in the service request. If you are calling the RIW Service Desk for an urgent request, having this information ready will assist in prioritisation an triage.
Field | Option |
Full name | |
Phone number |
|
Email address |
|
Alternative contact full name |
|
Alternative contact phone number |
|
Alternative contact email address |
|
Type of hardware this issue relates to |
|
Name of site where hardware item is located |
|
Asset number or device name if known |
|
Details of issue & troubleshooting steps undertaken |
|
Is the issue affecting ALL workers on site? |
|
| Is there a redundancy (another Kiosk/Turnstile available for use) in place? |
|
| Is this specific issue affecting MULTIPLE sites? |
|
| Are you in a shutdown or impending shutdown which will require this device to be functional? |
|
| How long has this device been deployed on site for? |
Step 3: Triage and response
The issue will be triaged using the priority definitions listed below. If a technician is required to attend site, the RIW Service Desk will coordinate the call-out. Please note that if a call-out is required and the issue is a non-warranty item, then a call-out fee may be charged. This will be discussed with you during fault resolution.
Priority definitions of support
- Priority 1 (P1) means an issue that results in users being unable to operate the device (ie the Hardware Devices and Software, including the Kiosk and Turnstile / Transient Point Solution) in accordance with the business processes or severely impacts business productivity and service levels.
- Priority 2 (P2) means an issue that significantly impacts the user’s ability to use the device (ie the Hardware Devices and Software, including the Kiosk and Turnstile / Transient Point Solution) without using unsustainable workarounds or has a major impact on business productivity and service levels.
- Priority 3 (P3) means an issue that has a minor impact on the user’s ability to use the device (ie the Hardware Devices and Software, including the Kiosk and Turnstile / Transient Point Solution) using sustainable workarounds or has a minor impact on business productivity and service levels.
- Priority 4 (P4) means an issue that does not impede the user’s ability to use the device (ie the Hardware Devices and Software, including the Turnstile / Transient Point Solution) or does not impact business productivity and service levels. This defect severity level is used to highlight cosmetic or nuisance issues.
Resolution timeframes (approximate)
| Priority | Response | Workaround time | Fix time | Technician to attend site |
|---|---|---|---|---|
| P1 | 30 mins | 2 hrs | 4 hrs | 3 hrs |
| P2 | 1 hr | 4 hrs | 8 hrs | 5 hrs |
| P3 | 4 hrs | 8 hrs | 24 hrs | 24 hrs by appointment |
| P4 | 8 hrs | 1.5 days | 3 days | 3 days by appointment |
RIW Knowledge Centre Article Link:
https://support.riw.net.au/support/solutions/articles/51000155011
Did you find it helpful? Yes No
Send feedbackKiosk Troubleshooting Guide
Please use this troubleshooting guide if you are experiencing issues with a Kiosk. If the issue is unable to be resolved by following the steps below, please refer to further articles that are listed below.
Common Issues
Kiosk not responding?
- Restart kiosk – Power PC off by pressing the blue power button located at the front of the PC. Wait 30 seconds and power PC back on.
- No network? Restart all sources of network hardware (router/modem etc.) and check if power is running on devices.
- Ensure all cables to the PC and power board are firmly in place. These could have dislodged due to transit or vibrations on site.
- Check power to the outlet (powerpoint) or before the outlet is cut (due to outage, power surge etc.)
Connection issues?
- Is the kiosk connected to the Wi-Fi network? The Wi-Fi symbol in the top right corner of the screen will determine network connectivity.
- Is the network cable connected to the PC?
- Is the router functioning?
- What lights are flashing?
- What colour (green is active and red is inactive)
- Is the network down?
- Has power been cut tot he network / modem / router? (ie. lights are off)
PC not functioning?
- What colour are the LED lights on the PC?
- Blue - All is okay
- Orange flashing - motherboard is faulty
- Red - onboard power is dead
NOTE: If the lights are showing orange or red, then a replacement PC may be required.
Stickers not printing?
- Does the printer have stickers loaded and are they loaded correctly
- Is the printer connected to the power board?
- Does the printer have debris caught in the printing mechanism?
Cannot scan RIW cards, including virtual cards?
- Is the Kiosk powered on and has connectivity?
- Has a 'Access Denied message displayed?
- Has 'Evacuation Mode' been activated?
Still not working?
If the kiosk is still not functioning after attempting the troubleshooting tips above, please refer to the component troubleshooting guides below:
Component Troubleshooting
PC Troubleshooting
Please refer to our article: Kiosk PC Troubleshooting Guide
Scanner Troubleshooting
Please refer to our article: Kiosk Scanner Troubleshooting Guide
Printer Troubleshooting
Please refer to our article: Kiosk Printer Troubleshooting Guide
Camera Troubleshooting
Please refer to our article: Kiosk Camera Troubleshooting Guide
Touchscreen Troubleshooting
Please refer to our article: Kiosk Touchscreen Troubleshooting Guide
If the kiosk is still not functioning after attempting the troubleshooting tips above, please contact the Service Desk on 1300 101 682 or raise a Service Request at https://www.riw.net.au/contact-us/request-a-service/ by selecting category & sub-category mentioned in the below screenshot: 
Did you find it helpful? Yes No
Send feedback